-
Flow Adjustment Inside and Around Large Finite-Size Wind Farms
Energies 2017, 10(12), 2164; doi:10.3390/en10122164 Article: Flow Adjustment Inside and Around Large Finite-Size Wind Farms In this study, large-eddy simulations are performed to investigate the flow inside and around large finite-size wind farms in conventionally-neutral atmospheric boundary layers. Special emphasis is placed on characterizing the different farm-induced flow regions, including the induction, entrance and development, fully-developed, […]
-
Nanofluid flow and heat transfer in boundary layers at small nanoparticle volume fraction: Zero nanoparticle flux at solid wall
Arch. Mech., 69, 1, pp. 75-100, Warszawa 2017 Article: Nanofluid flow and heat transfer in boundary layers at small nanoparticle volume fraction: Zero nanoparticle flux at solid wall The continuum formulation is applied to the developing boundary layer problem, which approximates the entrance region of nanofluid flow in micro channels or tubes. The thermophysical properties […]
-
Simulation of an Oscillating Hydrofoil near Boundaries
67th Annual Meeting of the APS Division of Fluid Dynamics Volume 59, Number 20, San Francisco, CA Abstract: D24.00001: Simulation of an Oscillating Hydrofoil near Boundaries An oscillating hydrofoil in freestream flow is computationally investigated for the application of a novel hydrokinetic energy device. The hydrofoil is prescribed a rigid body sinusoidal motion in pitch […]
-
A Moving Mesh Approach for Flow Simulations of an Oscillating Hydrofoil
• Investigated the feasibility of using dynamic mesh approach to simulate oscillating hydrofoil motion in Computational Fluid Dynamic (CFD) model • Implemented direct numerical simulation, used PISO algorithm and PimpleDyMFoam solver to conduct the CFD simulation in OpenFOAM • Post-processed the CFD simulation results using Tecplot and ParaFoam • Validated the results (i.e. flow fields, […]
-
Capstone Project: Design of Providence Pedestrian Bridge
• Designed the steel truss structure of the canopies with tampered metal cladding for the Providence Pedestrian Bridge • Used SAP2000 to model and analyzed the gravity load carrying and lateral force resisting system of the steel canopies Project Report Project Presentation
-
Design Project of Brown University Residence Hall
• Designed a dormitory with five floors of steel structure, two floors of concrete structure and its footing system • Used RAM to model and analyzed the gravity load carrying, lateral force resisting system and footing system of the building • Optimized the building design based on cost estimation, member size and amount of material […]
-
Combined Solar Thermal and Photovoltaic System Design Project, Brown University, RI
Course: ENGN 1930U Sustainable Energy Technologies – Brown University Collaborated with Brent Lunghino, Erik Berg, Hannah Rose Schonwald, Lillian Mirviss, Robert Rozansky, Yuna Saiki. Update on Solar-thermal Panel Largest in Country Sexy Solar Manual Mounting System
-
Beyond the Bottle
“Beyond the Bottle” is a Brown campus campaign organized by Empower, an awareness group at Brown. The objective of this campaign is to encourage Brown students to reduce the use of bottled water through the use of tap and reusable water bottles.
-
Green Argument – Practicability and Future of Solar Parabolic Cookers (SK-14) in Nepal – Why Should Nepalese Government Introduce SK-14 to the Community.
Course: ENVS 0410 Environmental Stewardship – Brown University Green Argument – Solar Parabolic Cookers (SK-14) in Nepal
-
Social Entrepreneurial Case Study – Madagas
Course: ENGN 1930V Engineers of the Future – Architects of dream – Brown University Collaborated with David Sanz, Dylan Stein and Eric Shine. Madagas Case Study
-
Follow
Following
Already have a WordPress.com account? Log in now.
Ka Ling Wu 